Licensed & Insured, in Greeley and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Greeley
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (970) 714-2774 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Greeley and surrounding areas · On-site visits included · Free estimate within 24h
Greeley Metal Roofing is a team of local certified professionals based in Greeley. We respond quickly in Greeley and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (970) 714-2774⭐⭐⭐⭐⭐ 4.9/5 · 312 verified Google reviews
“Needed a new metal roof on our hay barn out in the rural part of the county and these guys knocked it out in two days. The crew of four was organized, and they hauled off every last scrap of old tin before they left.”
Commercial & Agricultural Metal Roofing
“We wanted metal over the brick entry porch without tearing off the old shingles, and Greeley Metal Roofing handled the retrofit exactly like they promised. Matching the flashing around the brick took some care and it looks factory-clean.”
Metal Roof Over Shingles (Retrofit)
“Got the red standing seam panels put on our grain barn and it completely changed the look of the place. Straight lines, screws set perfect, and they even added snow guards since we get drifts out here.”
Commercial & Agricultural Metal Roofing
“Standing seam install on our ranch house, about 2,200 square feet, done in three days flat. The foreman walked me through the panel layout beforehand and there wasn't a single surprise on the invoice.”
Standing Seam Metal Roofing
“Had a leak over the kitchen every time it rained hard and two other outfits couldn't find it. These folks traced it to failed screws and a bad flashing detail around the chimney, fixed it in an afternoon, and we've been dry through two storms since.”
Metal Roof Leak Repair
“Solid install overall and the crew was respectful of our yard. Only gripe is they showed up a day later than scheduled, but the finished roof is sharp and the cleanup was spotless.”
Metal Roof Installation
“We went with the stone-coated steel to keep the look of the old shingles but never deal with hail damage again. The color match to our trim is dead on and the crew treated the landscaping like it was their own.”
Stone-Coated Steel Roofing
“Full tear-off and replacement on our 1970s house, and honestly it was the smoothest contractor experience we've had. They replaced some rotten decking, re-did the flashing and skylight seals, and finished a day early. Wish I'd done it years ago.”
Metal Roof ReplacementReal photos of our work in Greeley · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener ribbed panel installation | Starting at $8/sq ft | Includes tear-off, synthetic underlayment, panels, screws, and basic flashing; steeper pitch or complex roof lines raises the rate |
| Standing seam installation | Starting at $12/sq ft | Concealed fasteners, raised seams, and premium trim; roof complexity and panel gauge are the main cost drivers |
| Stone-coated steel or metal shingle installation | Starting at $11/sq ft | Includes granule-finished or stamped panels with matching trim; HOA design requirements and valleys add labor |
| Retrofit over existing shingles | On estimate | Needs an on-site look to confirm the existing roof is sound and within the code layer limit |
| Travel | Included | in Greeley and surrounding Weld County areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (970) 714-2774, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Snap-lock standing seam | Starting at $10/sq ft | Installed with concealed clips and standard flashing; roof pitch and complexity move the price. |
| Mechanically seamed panels | Starting at $13/sq ft | Double-locked seams for low-slope or high-wind roofs; panel gauge and access affect cost. |
| Tear-off and re-deck | On estimate | Old shingle layers and sheathing condition need an on-site look before we quote. |
| Travel | Included | In Greeley and surrounding Weld County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (970) 714-2774, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Full tear-off and replacement, exposed-fastener panels | Starting at $9/sq ft | Includes tear-off, deck inspection, underlayment and new ribbed or corrugated panels; pitch and deck condition move the price. |
| Standing seam replacement | Starting at $13/sq ft | Includes concealed-fastener panels and full flashing; roof complexity and panel gauge move the price. |
| Stone-coated steel or metal shingle replacement | Starting at $14/sq ft | Includes premium panel profiles and trim; HOA design review and roof pitch move the price. |
| Complex or large-scale job | On estimate | Steep roofs, multiple dormers, chimney and skylight work and heavy deck repair need an on-site look first. |
| Travel | Included | In Greeley and surrounding Weld County areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (970) 714-2774, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Retrofit over one shingle layer | Starting at $7/sq ft | Includes deck inspection, strapping, high-temp underlayment and panel install on a sound deck. |
| Standing seam retrofit | Starting at $10/sq ft | Concealed-fastener panels on purlins, priced higher for profile and trim complexity. |
| Stone-coated steel retrofit | Starting at $11/sq ft | Textured panels over strapping, popular where HOA or historic review requires a shingle look. |
| Deck repair and flashing add-ons | On estimate | Priced per area after inspection, since soft sheathing and chimney work vary house to house. |
| Travel | Included | in Greeley and surrounding Weld County towns, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (970) 714-2774, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (sealant, screws, small flashing) | Starting at $450 | Includes resealing a few penetrations, replacing a handful of screws and patching one flashing detail. |
| Panel replacement (1 to 5 panels) | Starting at $850 | Includes removing dented panels, installing matching replacements and new butyl tape and fasteners. |
| Flashing rebuild at chimney or skylight | Starting at $750 | Includes removing old flashing, rebuilding step and counter flashing and resealing the penetration. |
| Storm or hail damage repair | On estimate | Scope depends on the number of panels hit, screw condition and how much flashing was damaged. |
| Travel | Included | In Greeley and surrounding Weld County towns, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (970) 714-2774, no obligation to book the repair. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor leak repair (fasteners, pipe boot, single seam) | Starting at $450 | Covers diagnosis and a small fix like failed fasteners or one resealed penetration; access and roof pitch move the price. |
| Flashing, chimney, or skylight leak repair | Starting at $650 | Rebuilds or replaces flashing and counter-flashing at penetrations; complexity of the detail and panel type drive cost. |
| Multi-point or storm-related leak repair | Starting at $900 | Addresses several leak points after hail or wind; number of failed fasteners and panels involved sets the final figure. |
| Emergency tarping after storm | Starting at $350 | Secures the roof to stop active water intrusion; roof size, height, and same-day scheduling affect the rate. |
| Complex or large-scale job | On estimate | Needs an on-site look before a number is given, since panel replacement or structural repair may be required. |
| Estimate | Free | Response within 24 hours at (970) 714-2774, with no obligation to book the repair. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Spot re-fastening | Starting at $750 | Covers one slope or small outbuilding with a limited number of failed fasteners replaced. |
| Full-plane re-fastening | Starting at $1,200 | Replaces every fastener on one plane with oversized screws and UV-resistant washers. |
| Whole-roof re-fastening | Starting at $2,400 | Every fastener on the roof, plus panel re-seating and lap checks where needed. |
| Oversized screw retrofit | On estimate | Priced after an on-site look because elongated holes and panel movement vary widely. |
| Travel | Included | In Greeley and surrounding Weld County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (970) 714-2774, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Ribbed panel re-roof, simple roof | Starting at $5.50/sq ft | Includes tear-off, underlayment, panels, trim, and closures on an accessible roof plane |
| Corrugated panel install on outbuilding | Starting at $6.25/sq ft | Barn and shed work; price moves with height, access, and panel gauge selected |
| Re-fastening and screw replacement | From $450 | Covers backed-out screws and gaskets on a typical roof; larger roofs priced per square |
| Complex or steep roof with valleys | On estimate | Cut-up pitches, skylights, and deck repair need an on-site look before pricing |
| Travel | Included | in Greeley and surrounding Weld County towns, no separate call-out or mileage fee |
| Estimate | Free | Response within 24 hours at (970) 714-2774, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof replacement | Starting at $9/sq ft | Includes tear-off, underlayment, ice-and-water shield, and flashing; deck condition and roof pitch move the price |
| Metal shingle retrofit over shingles | Starting at $7/sq ft | Skips tear-off and disposal when the existing deck is sound and code allows another layer |
| Class 4 impact-rated system | Starting at $11/sq ft | Heavier-gauge hail-rated steel shingles; gauge, profile, and color selection drive the final number |
| Complex or large-scale job | On estimate | Two-story homes, multiple valleys and dormers, chimney flashing, and steep pitches need an on-site look |
| Travel | Included | In Greeley and surrounding Weld County areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24 hours at (970) 714-2774, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel, standard profile | Starting at $9/sq ft | Installed with underlayment and standard flashing, price rises with roof complexity and pitch |
| Premium shake or slate profile | Starting at $11/sq ft | Textured premium panels cost more in material but suit historic and Craftsman homes |
| Retrofit over existing shingles | Starting at $10/sq ft | Batten system over one sound shingle layer, saves tear-off and disposal cost |
| Complex or large-scale job | On estimate | Cut-up roofs, multiple valleys, skylights, or steep pitches need an on-site look first |
| Travel | Included | in Greeley and surrounding Weld County areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (970) 714-2774, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accent roof (porch, bay window, dormer) | Starting at $20/sq ft | Includes custom-fabricated copper pans and flashings; access and soldering detail move the price. |
| Full copper architectural roof | Starting at $32/sq ft | Includes 20 oz copper, underlayment and soldered seams; roof complexity and pitch drive the number. |
| Zinc or aluminum specialty panels | Starting at $18/sq ft | Includes formed panels and standard flashings; custom trim and mixed-metal detailing raise the cost. |
| Copper gutters and trim package | On estimate | Half-round gutters, downspouts and fascia caps priced per linear foot after on-site measurement. |
| Travel | Included | In Greeley and surrounding Weld County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (970) 714-2774, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Reflective coating on sound R-panel roof | Starting at $2.50/sq ft | Includes wash, rust spot treatment, and one reflective topcoat on an accessible roof. |
| Rust converter plus primer system | Starting at $3.25/sq ft | Adds chemical rust treatment and metal primer where fasteners and laps show surface rust. |
| Steep or complex roof (pitch, valleys, penetrations) | On estimate | Pitch, skylights, chimneys, and snow guards raise labor and require an on-site scope. |
| Travel | Included | in Greeley and surrounding Weld County towns, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (970) 714-2774, with no obligation to book the job. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single chimney flashing repair | Starting at $600 | Covers new step and counter-flashing on one accessible chimney, with labor and standard metal included. |
| Skylight curb flashing repair | Starting at $850 | Rebuilds the curb flashing on one skylight, including underlayment inspection and new metal bent on site. |
| Valley or wall transition repair | Starting at $750 | Replaces rusted valley or wall flashing and re-laps the surrounding courses on one roof section. |
| Multiple penetration re-flash | On estimate | Three or more penetrations on the same roof need an on-site look to price labor and material accurately. |
| Emergency tarp and temporary seal | Starting at $350 | Secures the failed penetration and stops active water intrusion until the permanent repair is scheduled. |
| Travel | Included | In Greeley and surrounding Weld County areas, with no separate call-out or mileage fee added. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single run over one entry or patio | Starting at $1,200 | Covers pad guards on one roof run, includes layout and fastener check. |
| Multiple runs on a two-story roof | Starting at $2,400 | Several guard rows over entries, walkways and driveway, priced by linear feet. |
| Snow rail or bar system | Starting at $1,800 | Continuous rail along the eave, priced by run length and mounting type. |
| Heated eave cable | On estimate | Needs power, controller and roof layout review before a number is given. |
| Travel | Included | in Greeley and surrounding Weld County areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (970) 714-2774, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Roof inspection and damage report | Free | Full roof and attic inspection with photo documentation, written scope, and repair versus replacement recommendation. |
| Fastener and flashing repair | Starting at $350 | Replace backed-out screws and gaskets, reseal penetrations and flashing; price moves with roof size and access. |
| Panel replacement (partial) | Starting at $900 | Replace dented or creased panels and reseal seams; price depends on panel type, pitch, and number of panels. |
| Full storm damage re-roof | On estimate | Widespread hail or wind damage needs an on-site look at panel condition, decking, and insurance scope before pricing. |
| Travel | Included | In Greeley and surrounding Weld County communities, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (970) 714-2774, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Residential metal roof inspection | Free estimate | Full walk-over with photo report, fastener and seam check, and remaining service life estimate; roof size and pitch move the price. |
| Hail and storm damage inspection | Starting at $250 | Dent mapping, granule loss photos, and an insurance-ready written report; roof size and number of slopes move the price. |
| Pre-sale and buyer inspection | Starting at $300 | Full condition report with repair cost range for real estate transactions; number of penetrations and skylights move the price. |
| Commercial and agricultural inspection | On estimate | Large square footage and walkability require an on-site look before we quote; barns, shops, and grain buildings included. |
| Travel | Included | in Greeley and surrounding Weld County towns, no separate call-out or mileage fee |
| Estimate | Free | Response within 24 hours at (970) 714-2774, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| 5-inch seamless aluminum gutter | Starting at $9/linear ft | Includes seamless run, hidden hangers, end caps, and basic downspout; price rises with roof height and access. |
| 6-inch seamless aluminum gutter | Starting at $12/linear ft | Higher-capacity run for standing seam roofs and steep pitches; more hangers and larger outlets add cost. |
| Heavy-gauge steel or copper gutter | Starting at $22/linear ft | Riveted or soldered runs rated for snow slide; material cost and historic profile matching drive the price. |
| Gutter guard installation | Starting at $4/linear ft | Snow-rated screened guard installed on existing or new gutter; tree coverage and roof pitch affect labor time. |
| Downspout and discharge routing | Starting at $18/linear ft | Includes downspout, elbows, and extension to a pop-up emitter; distance from foundation and burying add cost. |
| Complex or large-scale job | On estimate | Multi-story homes, valleys, historic profiles, and fascia repair need an on-site look before a number is given. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Roof inspection and estimate | Free | Full roof walk, panel and fastener check, photo documentation, written scope and no-obligation price. |
| Small agricultural building (under 2,000 sq ft) | Starting at $3,500 | Exposed-fastener R-panel or corrugated replacement on a shed or small barn, including basic flashing. |
| Mid-size barn or shop (2,000 to 6,000 sq ft) | Starting at $9,000 | Panel replacement with new fasteners and closures; slope, access and insulation move the final number. |
| Commercial or large agricultural roof | On estimate | Standing seam, insulated panels or multi-section roofs need an on-site look before pricing. |
| Travel | Included | In Greeley and surrounding Weld County areas, with no separate call-out or mileage fee. |
| Estimate response | Free | Response within 24 hours at (970) 714-2774, with no obligation to book. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Greeley need a crew that understands this city's specific challenges: violent hail, straight-line wind, intense high-altitude sun, and hard freeze-thaw cycles. Greeley Metal Roofing is your local source for metal roof installation, replacement, re-roof, and repair. We work on everything from historic brick Victorians near Lincoln Park to modern two-story homes in Promontory and West Greeley, and we know the large stock of aging screw-down roofs across Weld County. Our network of licensed, bonded, and insured local contractors serves Greeley, Evans, Windsor, Johnstown, and Milliken. Whether you need a full standing seam installation or a targeted repair, we start with straight guidance and a clear scope. Reach out for a free estimate and we will assess your roof honestly.
Metal roofs fail for predictable reasons, and most leaks trace back to a handful of culprits. On 15 to 30 year old exposed-fastener roofs, the number one cause is fasteners backing out as EPDM sealing washers dry and shrink. Once that seal breaks, water finds a path. Seam separation from thermal movement, failed pipe boots, and flashing gaps at chimneys, skylights, and valleys are close behind. Wind-lifted panels after a storm and punctures from fallen limbs also open the roof. If ignored, water tracks along purlins and decking far from the entry point, leading to rotted sheathing and soaked insulation.
The honest call between repair and replacement depends on the roof's condition. Often, a full screw replacement and re-fastening restores a watertight roof for a fraction of replacement cost, especially when the panels and underlayment are otherwise sound. We will tell you plainly when a repair makes sense and when it is time to plan for a new roof. For active leaks, call (970) 714-2774 and we will schedule an inspection.
Our metal roof leak repair team finds the source, not just the stain on your ceiling. We also handle screw replacement and re-fastening to stop small issues from becoming big ones. Contact us to get started.
We install the full range of metal systems and match the roof to your home, not the other way around. Standing seam uses concealed clips and offers premium durability with no exposed screws to maintain. Corrugated and ribbed panels are the economical workhorse for cabins, barns, and workshops. We also install metal shingles, stone-coated steel, and copper or specialty metal for accents.
Here is the honest comparison: standing seam costs more up front but has no exposed fasteners to service, while screw-down costs less and needs its fasteners checked and replaced over its life. Retrofit over existing shingles is a legitimate option when the deck is sound; when it is not, tear-off is the right call. We will walk you through both.
Metal roof costs in Greeley are typically quoted per square foot for installations, while repairs are often flat-rate. Pricing depends on the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. We frame all figures as typical ranges because final pricing depends on the roof and site conditions. Some carriers may offer premium discounts for metal or impact-rated roofs, but that is never a promise.
For a clearer picture, visit our pricing page or request a free estimate or free roof inspection. We will give you a straight answer on what your roof needs.
After a storm, we inspect and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise a claim will be approved. On permits: in most jurisdictions, a permit is commonly required for a full replacement, but requirements vary by city. Historic district or HOA design review can also affect panel profile and color choices. Requirements vary, so always verify with the Greeley building or planning department before starting your project.
If you have questions about the process, contact us for guidance. We are here to help you navigate the steps honestly.
Ready to get started? Greeley Metal Roofing serves in Greeley and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Greeley · Response within 24h · No commitment · ☎ (970) 714-2774
Your Free Quote Request