Serving the Greeley area  ·  (970) 714-2774  ·  Open Mon-Sun 7am-7pm
📞 (970) 714-2774 Free Quote

Metal Roofing in Eaton, CO (80646) · Local Professionals

Greeley Metal Roofing · Fast response in Eaton and the Greeley area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+312Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Eaton is a farm town at heart, and it shows in the housing stock: classic brick homes near the downtown blocks, ranch houses and split-levels on quiet streets, and plenty of barns, machine sheds and outbuildings on the edges of town. Lots are wide, the wind has room to run, and hail comes through Weld County like it owns the place.

That mix is exactly why homeowners in Eaton (80646) call Greeley Metal Roofing. We know the difference between a 1920s bungalow near Eaton Elementary and a newer build off Collins Street, and we quote both the same way: straight numbers, no pressure, and a crew that shows up when we say we will.

Metal Roofing in Eaton (80646)

Eaton sits on flat, open ground north of Greeley, and that flatness is the first thing that shapes a roofing job here. There is no hill to shed water toward, so drainage depends on pitch, gutters and flashing doing their jobs exactly right. Wide lots usually mean good access for a dump trailer and ladder setup, but older properties around the downtown core can have mature trees close to the eaves, which means we plan for limb clearance and gutter protection before the first panel goes up. Farm and acreage properties often have barns and machine sheds with corrugated or R-panel roofs that have taken decades of sun and hail, and those jobs are their own animal: longer runs, bigger fasteners, and a schedule that works around hay season.

Our team has worked metal roofs across Eaton and the surrounding Greeley area long enough to know which profiles hold up to Weld County hail and which colors fade under the high-altitude sun. We handle everything from standing seam on a house to retrofit panels over an old shingle roof on a shop, and we do it insured and permitted.

Our services in Eaton

How a Job Works in Eaton

Step 1: you call (970) 714-2774 or send a request, and we set up a free on-site assessment. We walk the roof, check the decking, fasteners, flashing and gutters, and talk through what you actually need versus what can wait. You get a written estimate with square-foot pricing before anything is ordered.

Step 2: once you approve, we pull the permit through the Town of Eaton and schedule the work. On tighter in-town lots we stage materials in the driveway and keep the street clear, and on acreage jobs we coordinate around equipment and animals. If your property is in an HOA or a historic overlay, we help you get the panel profile and color approved before delivery.

Step 3: cleanup and final walkthrough. We magnet-sweep for screws and nails, haul off old material, and walk the finished roof with you so you can see the seams, flashing and fasteners yourself. We leave your property clean, every time.

Pricing in Eaton follows the same honest math we use across the Greeley area. Corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof over shingles (retrofit) around $7, standing seam around $10, and stone-coated steel or metal shingle around $9. A basic metal roof repair or leak repair starts at $450, screw replacement and re-fastening at $750, and flashing, chimney or skylight work at $600. Snow guards and ice protection start at $1,200, and gutters for metal roofs run about $9 per linear foot. The final number depends on roof size, pitch, how much decking or flashing needs replacement, access, and how soon you need it done. Call (970) 714-2774 for a free estimate and a straight answer.

My barn or machine shed outside Eaton has old corrugated panels that are rusting through. Can you match the existing profile?
Yes. We measure the existing corrugation and rib spacing and match it as closely as possible so the new panels tie into the old structure cleanly. On ag buildings we often recommend R-panel for the long runs and heavier fasteners, and we can quote a full re-roof or a partial replacement depending on how much of the purlin structure is still sound.
A storm just peeled back panels on my roof in Eaton. How fast can you get out?
We treat wind-lifted and leaking roofs as priority calls. Call (970) 714-2774 and we will schedule an inspection, usually within a day or two depending on storm volume, and we can tarp or secure the area to prevent further water damage while the repair is quoted. We also document the damage for your insurance claim, though coverage decisions are always up to your carrier.
What does a typical metal roof replacement cost for a ranch house in Eaton?
Most ranch and split-level homes in Eaton fall in the range of a few hundred to a couple thousand square feet of roof area, so a replacement commonly lands somewhere between the low thousands and the mid teens depending on the profile you choose. Standing seam sits at the higher end, corrugated and retrofit panels at the lower end. Size, pitch, decking condition and flashing all move the number, so the free estimate is the only way to get it right.
Do I need a permit for a metal roof in Eaton, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof, and the rules and fees are set by the local jurisdiction. We handle the permit application and inspection scheduling for you, and you can check current requirements at the City of Eaton website (https://www.eatonco.org/) or by calling the town office. We always defer to the local building department on what applies to your specific project.
My neighbor says my new roof panels overhang the property line. What do I do?
Property line questions are best settled before the panels are ordered. We set the roof layout based on the existing structure and eave lines, and if there is any question about the line we recommend a survey or a conversation with your neighbor first. If your property is in an HOA, we also help coordinate the design review so the profile and color are approved before installation.
Are you insured for work on my property in Eaton?
Yes. That protects you if anything goes wrong on the job and covers our crew while they are on your roof.
What maintenance does a metal roof need in Eaton's climate?
The main things to watch are fasteners and debris. Hail and wind can loosen screws over time, and cottonwood leaves and grit collect in valleys and gutters. We recommend an inspection after hail season and again before winter, plus periodic re-fastening on older panel roofs. Snow guards are worth considering on steep pitches and over doorways where sliding snow is a hazard.
Why choose us?

Trusted professionals in Greeley

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Greeley

All your work handled by qualified professionals in Greeley

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

312+ Verified Client Reviews in Greeley

⭐⭐⭐⭐⭐ 4.9/5 · 312 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Greeley · Response within 24h · No commitment · ☎ (970) 714-2774

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Greeley ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm