Serving the Greeley area  ·  (970) 714-2774  ·  Open Mon-Sun 7am-7pm
📞 (970) 714-2774 Free Quote

Metal Roofing in Severance, CO (80546) · Local Professionals

Greeley Metal Roofing · Fast response in Severance and the Greeley area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+312Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Severance is a small town just north of Greeley where wide-open acreages meet newer subdivisions, and the wind and hail come across the prairie with nothing to slow them down. Homes here range from brand-new builds in neighborhoods like Belmont Farms and Hidden Valley to older farmhouses and outbuildings on larger lots, many with low-pitched roofs that take a beating from spring storms and winter freeze-thaw cycles.

When your roof starts leaking, gets pounded by hail, or you're ready to upgrade to metal, Greeley Metal Roofing is the local crew to call. We're based in Greeley and know the Severance area well, from the new construction off County Road 23 to the rural properties out toward the Weld County line. We handle everything from standing seam installation to storm damage repair, and we do it with fully insured crews who respect your property.

Metal Roofing in Severance (80546)

Severance sits on flat, open ground north of Greeley, and that means two things for your roof: wind and hail. The same open farmland that gives you big skies also lets straight-line winds gust across your property unchecked, and spring and summer thunderstorms regularly drop large hail. Many homes here have low-slope roofs or complex rooflines with valleys and dormers, which are prone to ice damming in winter and wind uplift during storms. Newer subdivisions often have tight lot lines and HOA design rules, while acreage properties may have long driveways, outbuildings, and wells or septic systems that require careful staging. We've worked on everything from single-story ranches to two-story stucco homes, and we know how to handle the access and drainage challenges that come with Severance's soil and grade.

Our team has been serving Severance and the surrounding Weld County area for years. We understand the local building stock, the common failure points, and the permit process, and we use that knowledge to recommend the right metal roofing solution for your home, whether that's a retrofit over existing shingles or a full tear-off and standing seam installation.

Our services in Severance

How a Job Works in Severance

Step 1: It starts with a call to (970) 714-2774 or a request through our website. We'll schedule a free on-site assessment at your convenience, inspect your roof and attic, and discuss your options and budget. You'll get a written estimate with clear pricing, no surprises.

Step 2: Once you approve the estimate, we'll pull the required permits from the Town of Severance and coordinate with any HOA you may have. On installation day, our crew arrives on time, protects your landscaping and driveway, and gets to work. For tighter lots in newer subdivisions, we stage materials carefully to avoid blocking neighbors, and on acreage properties we plan for equipment access and any outbuildings.

Step 3: When the job is done, we walk the property with you, clean up every nail and scrap, and make sure you're completely satisfied. We leave your place as clean as we found it, or cleaner.

Metal roofing in Severance is priced by the square foot, and the final number depends on the material, roof complexity, and condition of your existing roof. For a typical home, metal roof installation starts around $8 per square foot, standing seam runs about $10 per square foot, and a retrofit over existing shingles can start near $7 per square foot. If you need repairs, common fixes like leak repair or flashing work start around $450, while screw replacement and re-fastening starts at $750. We also offer free inspections and estimates for storm damage, so you know exactly what you're dealing with before you commit. Call us at (970) 714-2774 to schedule your free estimate and get a realistic ballpark for your Severance home.

My house is in one of the newer subdivisions off County Road 23, and the HOA has strict rules about roof color. Can you help with that?
Yes. We work with HOAs regularly in Severance and the surrounding area. We'll review your HOA's design guidelines with you, provide color samples, and submit any required paperwork for approval before we order materials. This keeps your project on schedule and avoids surprises.
A storm just rolled through Severance and I think my roof has hail damage. How quickly can you get out to inspect it?
We offer free storm damage inspections and prioritize emergency calls after major storms. Call us at (970) 714-2774, and we'll schedule an inspection as soon as possible, usually within a day or two depending on demand. We'll document any damage with photos and provide a written estimate for repairs or replacement.
What's the typical cost for a metal roof replacement on a 2,000-square-foot home in Severance?
For a 2,000-square-foot home with a standard pitched roof, a full metal roof replacement typically starts around $9 per square foot, so you're looking at roughly $18,000 and up, depending on material choice, roof complexity, and whether we need to remove existing layers. Standing seam and stone-coated steel will be at the higher end. We provide free estimates so you can get an accurate number for your specific home.
Do I need a permit to replace my roof in Severance, and can you handle that for me?
Yes, roofing permits are generally required for roof replacements in Severance. The rules and fees are set by the town, and requirements can vary. We'll pull the necessary permits for you and coordinate inspections. For specific details about current requirements, you can check with the Town of Severance through the City of Severance website at https://www.townofseverance.org/, or we can help guide you.
My neighbor's tree branches hang over my roof, and I'm worried about liability if they cause damage. What should I do?
Property line and tree maintenance issues are civil matters between neighbors, but we can help by inspecting your roof for any damage from overhanging branches and recommending preventive measures like trimming or installing snow guards. If a branch has already caused damage, we can repair it and provide documentation for insurance purposes. We always recommend open communication with your neighbor first.
Are you fully insured for roofing work in Severance?
Yes, we are fully insured with both general liability and workers' compensation coverage.
What maintenance should I do on my metal roof in Severance to prevent winter ice dams?
In Severance, ice dams can form at the eaves when snow melts and refreezes. We recommend keeping gutters clear, ensuring proper attic insulation and ventilation, and considering snow guards or heat cable in problem areas. We offer snow guard installation and roof inspections to catch issues early. An annual inspection in the fall is a good habit to prevent costly repairs.
Why choose us?

Trusted professionals in Greeley

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Greeley

All your work handled by qualified professionals in Greeley

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

312+ Verified Client Reviews in Greeley

⭐⭐⭐⭐⭐ 4.9/5 · 312 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Greeley · Response within 24h · No commitment · ☎ (970) 714-2774

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Greeley ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm